CP series
Apraksts:
Romill technologies for harvesting, milling, preserving, storing wet grains.
Grain milling is applicable for both cow and pig feeding.
The grain harvesting time is longer and can start 3-4 weeks earlier.
Milling and storage of the grain takes place immediately after harvesting on the farm.
The grain does not need to be dried, so there are no drying and additional transport costs.
- The smallest machine of the CP series, a less powerful variant of the CP1 SIMPLE type
- It is especially suitable for smaller agricultural farms
- Filling with a front loader
- There are two sizes of pressing tunnels – 1.2 m or 1.5 m
- It achieves a capacity of 15 t/h with a tractor with a power input of 70 k
1 × crushing unit
2 operating rollers – 600 mm
hopper 2,8 m³
coarse crushing 8 – 15 t/h
fine crushing 4 – 8 t/h
- Technically simpler variant of CP1
- It is especially suitable for medium-sized agricultural farms
- Filling with front loader
- There are two sizes of pressing tunnels: 1.2 m or 1.5 m
- It achieves a capacity of 20 t/h with a tractor with a power input of 100 hp
1 × crushing unit
2 operating rollers – 900 mm
hopper 3,2 m³
coarse crushing 15 – 20 t/h
fine crushing 7,5 – 15 t/h
- Especially suitable for primary producers, or even for companies providing harvest services
- Filling with front loader or receiving screw conveyor (optional accessory)
- Advantages over CP1 SIMPLE: hydraulic working brake, larger hopper, larger diameter of the pressing screw, larger wheels with fenders, the possibility of using an adapter for bagging by-products
- Choice of three diameters of press tunnels – 1.2 m; 1.5 m or 2 m
- It achieves a capacity of 20 t/h with a tractor with a power input of 100 hp
1 × crushing unit
2 operating rollers – 900 mm
hopper 3,7 m³
coarse crushing 15 – 20 t/h
fine crushing 7,5 – 15 t/h
- Designed primarily for companies providing harvesting services and processing larger volumes of feed
- Directly on the machine there is an area for two IBC barrels with preservative
- Filling with a front loader or a receiving screw conveyor
- Choice of three sizes of press tunnels – 1.5 m; 2 m; 2.4 m or flexible tunnel
- It achieves a capacity of 40 t/h with a tractor with a power input of 160 hp
2 × crushing unit
4 operating rollers – 900 mm
hopper 3,4 m³
coarse crushing 30 – 40 t/h
fine crushing 15 – 30 t/h
- Designed primarily for companies providing harvesting services and processing larger volumes of feed
- Directly on the machine there is an area for two IBC barrels with preservative
- Filling with a front loader or a receiving screw conveyor
- Choice of three sizes of press tunnels – 1.5 m; 2 m; 2.4 m or flexible tunnel
- It achieves a capacity of 60 t/h with a tractor with a power input of 200 hp
2 × crushing unit
4 operating rollers – 1200 mm
hopper 10 m³
coarse crushing 45 – 60 t/h
fine crushing 30 – 45 t/h